SHARP AIR Conditioner remote controller Instructions – Manuals+

AIR CONDITIONER
REMOTE CONTROLLER ILLUSTRATION

Indoor unit
-AH-XC9XV
-AH-XC12XV

Outdoor unit
-AU-X3M21 XV
-AU-X4M28XV

Thank you very much for purchasing our air conditioner. Please read this owner’s manual carefully before using your air conditioner. Make sure to save this manual for future reference .

Remote Controller Specifications

NOTE:

Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. The following is a brief introduction to the remote control itself. For instructions on how to operate your air conditioner, refer to the How to Use The Basic/Advance Functions section of this manual.
NOTE: Please do not select HEAT mode if the machine you purchased is a cooling-only type. Heat mode is not supported by the cooling-only appliance.

Noted:
The heat function is available for AH-XC9XV and AH-XC12XV

NOT SURE WHAT A FUNCTION DOES?
Refer to the How to Use Basic Functions and How to Use Advanced Functions sections of this manual for a detailed description of how to use your air conditioner.

SPECIAL NOTE

Your air conditioning unit comes with two AM batteries. Put the batteries in the remote control before use :For optimum product performance :Do not dispose of batteries as unsorted municipal waste. Refer to local laws for proper disposal of batteries .

TIPS FOR USING REMOTE CONTROL

Remove the back cover to install batteries

Remote LCD Screen Indicators
Information is displayed when the remote controller is powered up.

Note: All indicators shown in the figure are for the purpose of clear presentation. But during the actual operation, only the relative functional signs are shown on the display window. The heat function is not available for AH-XC9XV and AH-XC12XV.

COOL operation

The operating temperature range for units is 17-30 °C. You can increase or decrease the set temperature by 1 °C increment .

AUTO operation
In AUTO mode, the unit will automatically select the COOL, FAN, HEAT*, or DRY mode based on the set temperature.

NOTE: FAN SPEED cant is set in Auto mode. HEAT FUNCTION is not available for AH-XC9XV and AH-XC12XV.

How To Use The Basic Functions

DRY operation(dehumidifying)

NOTE: FAN SPEED can’t be changed in DRY mode.

How To Use The Basic Functions

FAN operation

NOTE: You can’t set the temperature in FAN mode. As a result, your remote control’s LCD screen will not display temperature.

Setting the TIMER function
Your air conditioning unit has two timer-related functions:

The TIMER ON function allows you to set a period of time after which the unit will automatically turn on, such as when you come home from work.

Example: Setting unit to turn on after 2.5 hours.

TIMER OFF function

The TIMER OFF function allows you to set a period of time after which the unit will automatically turn off, such as when you wake up.

Example: Setting unit to turn off after 5 hours.

NOTE:  When setting the TIMER ON or TIMER OFF functions, up to 10 hours, the time will increase in 30-minute increments with each press. After 10 hours and up to 24, it will increase in 1-hour increments. The timer will revert to zero after 24 hours.
You can turn off either function by setting its timer to ” 0.0h “.

Setting both TIMER ON and TIMER OFF at the same time

Keep in mind that the time periods you set for both functions refer to hours after the current time. For example, say that the current time is 1 : 00 PM, and you want the unit to turn on automatically at 7 : 00 PM. You want it to operate for 2 hours, then automa ­ tically turn off at 9 : 00 PM .Do the following :

Example: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off (see the figure below)

Your remote display

How To Use The Advanced Functions

SLEEP Function
The SLEEP function is used to decrease energy use while you sleep (and don’t need the same temperature settings to stay comfortable). This function can only be activated via remote control. For the detail, see” sleep operation^ in “USER’S MANUAL?
Note: The SLEEP function is not available in FAN or DRY mode.

TURBO function
The TURBO function makes the unit work extra hard to reach your present temperature in the shortest amount of time possible.

SELF CLEAN function
Airborne bacteria can grow in the moisture that condenses around the heat exchanger in the unit. With regular use, most of this moisture is evaporated from the unit. When the self-clean feature is activated, your unit will clean itself automatically. After cleaning, the unit will turn off automatically.

You can use the self-clean feature as often as you like.
Note: You can only activate this function in COOL or DRY mode.

LOCK function
Press the Turbo button and Blow button simultaneously for one second to lock or unlock the keyboard.