Cassette tape – Wikipedia
The Compact Cassette or Musicassette (MC), also commonly called the tape cassette,[2] cassette tape, audio cassette, or simply tape or cassette, is an analog magnetic tape recording format for audio recording and playback. It was developed by the Dutch company Philips in Hasselt, Belgium, by Lou Ottens and his team. It was introduced in September 1963. Compact Cassettes come in two forms, either already containing content as a prerecorded cassette (Musicassette), or as a fully recordable “blank” cassette. Both forms have two sides and are reversible by the user.[3]
The compact cassette technology was originally designed for dictation machines, but improvements in fidelity led the Compact Cassette to supplant the stereo 8-track cartridge and reel-to-reel tape recording in most non-professional applications.[4] Its uses ranged from portable audio to home recording to data storage for early microcomputers. The first cassette player (although mono) designed for use in car dashboards was introduced in 1968. From the early 1970s to mid-2000s, the cassette was one of the two most common formats for prerecorded music, first alongside the LP record and later the compact disc (CD).[5]
Bạn đang đọc: Cassette tape – Wikipedia
Compact Cassettes contain two miniature spools, between which the magnetically coated, polyester – type plastic film ( magnetic tape ) is passed and wound. [ 6 ] Thes e spools and their attendant parts are held inside a protective plastic shell which is 4 by 2.5 by 0.5 inches ( 10 cm × 6.3 cm × 1.3 cm ) at its largest dimensions. The tape itself is commonly referred to as ” eighth-inch ” tape, supposedly 1 ⁄ 8 inch ( 3.17 mm ) wide, but it is slightly larger : 0.15 inches ( 3.81 mm ). [ 7 ] Two stereo pairs of tracks ( four total ) or two monaural audio tracks are available on the tape ; one stereo pair or one monophonic track is played or recorded when the tape is moving in one direction and the second ( pair ) when moving in the other direction. This reversal is achieved either by flipping the cassette, or by the reversal of tape movement ( ” auto-reverse ” ) when the mechanism detects that the tape has come to an end. [ 8 ]
Phân Mục Lục Chính
History[edit]
Before the Compact Cassette[edit]
Wollensak portable reel-to-reel tape recorder
Introduction of the Compact Cassette[edit]
Operating instructions for the Philips / Norelco Cartridge Tape Carry-Corder 150 ( 1964 )
One of the first cassette recorders from Philips, the Typ EL 3302 ( 1968 )
Inside of a cassette .
In the early 1960s Philips Eindhoven tasked two different teams to design a tape cartridge for thinner and narrower tape compared to what was used in reel-to-reel tape recorders. By 1962, the Vienna division of Philips developed a single-hole cassette, adapted from its German described name Einloch-Kassette.[12] The Belgian team created a two-spool cartridge similar to an earlier RCA design, but much smaller.
Philips selected the two-spool cartridge as a winner and introduced it in Europe on 30 August 1963 at the Berlin Radio Show,[20] and in the United States (under the Norelco brand) in November 1964. The trademark name Compact Cassette came a year later. The team of Dutch and Belgian origin at Philips was led by the Dutch Lou Ottens in Hasselt, Belgium.[21][22][23]
Philips also offered a machine to play and record the cassettes, the Philips Typ EL 3300. An updated model, Typ EL 3301 was offered in the US in November 1964 as Norelco Carry-Corder 150. By 1966 over 250,000 recorders had been sold in the US alone and Japan soon became the major source of recorders. By 1968, 85 manufacturers had sold over 2.4 million players.[19][24] By the end of the 1960s, the cassette business was worth an estimated 150 million dollars.[19] By the early 1970s the compact cassette machines were outselling other types of tape machines by a large margin.[25]
Philips was competing with Telefunken and Grundig ( with their DC International format [ 26 ] ) in a race to establish its cassette tape as the worldwide standard, and it wanted tư vấn from Japanese electronics manufacturers. [ 27 ] Philips ‘ Compact Cassette became dominant as a result of Sony pressuring Philips to license the format to them không lấy phí of charge. [ 28 ]In the early years sound quality was mediocre, but it improved dramatically by the early 1970 s when it caught up with the quality of 8 – track tape and kept improving. [ 5 ] The Compact Cassette went on to become a popular ( and re-recordable ) alternative to the 12 – inch vinyl LP during the late 1970 s. [ 5 ]
Popularity of music cassettes[edit]
The mass production of “blank” (not yet recorded) Compact Cassettes began in 1964 in Hanover, Germany.[19] Prerecorded music cassettes (also known as Music-Cassettes, and later just Musicassettes; M.C. for short) were launched in Europe in late 1965. The Mercury Record Company, a US affiliate of Philips, introduced M.C. to the US in July 1966. The initial offering consisted of 49 titles.[29]
However, the system had been designed initially for dictation and portable use, with the audio quality of early players not well suited for music. Some early models also had an unreliable mechanical design. In 1971, the Advent Corporation introduced their Model 201 tape deck that combined Dolby type B noise reduction and chromium ( IV ) oxide ( CrO2 ) tape, with a commercial-grade tape transport mechanism supplied by the Wollensak camera division of 3M Corporation. This resulted in the format being taken more seriously for musical use, and started the era of high fidelity cassettes and players. [ 4 ]Although the birth and growth of the cassette began in the 1960 s, its cultural moment took place during the 1970 s and 1980 s. [ 19 ] The cassette’s popularity grew during these years as a result of being a more effective, convenient and portable way of listening to music. [ 19 ] Stereo tape decks and boom boxes became some of the most highly sought-after consumer products of both decades. [ 19 ] Portable pocket recorders and high-fidelity ( ” hi-fi ” ) players, such as Sony’s Walkman ( 1979 ), also enabled users to take their music with them anywhere with ease. [ 19 ] The increasing user-friendliness of the cassette led to its popularity around the globe. [ 19 ] [ 30 ]
Like the transistor radio in the 1950s and 1960s, the portable CD player in the 1990s, and the MP3 player in the 2000s, the Walkman defined the portable music market for the decade of the ’80s, with cassette sales overtaking those of LPs.[5][31] Total vinyl record sales remained higher well into the 1980s due to greater sales of singles, although cassette singles achieved popularity for a period in the 1990s.[31] Another barrier to cassettes overtaking vinyl in sales was shoplifting; compact cassettes were small enough that a thief could easily place one inside a pocket and walk out of a shop without being noticed. To prevent this, retailers in the US would place cassettes inside oversized “spaghetti box” containers or locked display cases, either of which would significantly inhibit browsing, thus reducing cassette sales.[32] During the early 1980s some record labels sought to solve this problem by introducing new, larger packages for cassettes which would allow them to be displayed alongside vinyl records and compact discs, or giving them a further market advantage over vinyl by adding bonus tracks.[32] Willem Andriessen wrote that the development in technology allowed “hardware designers to discover and satisfy one of the collective desires of human beings all over the world, independent of region, climate, religion, culture, race, sex, age and education: the desire to enjoy music at any time, at any place, in any desired sound quality and almost at any wanted price”.[33] Critic Robert Palmer, writing in The New York Times in 1981, cited the proliferation of personal stereos as well as extra tracks not available on LP as reasons for the surge in popularity of cassettes.[34]
Between 1985 and 1992, the cassette tape was the most popular format in the UK and record labels experimented with innovative packaging designs. A designer during the era explained : ” There was so much money in the industry at the time, we could try anything with design. ” The introduction of the cassette single, called a ” cassingle “, was also part of this era and featured a music single in Compact Cassette form. Until 2005, cassettes remained the dominant medium for purchasing and listening to music in some developing countries, but compact disc ( CD ) technology had superseded the Compact Cassette in the vast majority of music markets throughout the world by this time. [ 35 ] [ 36 ]
Cassette culture[edit]
Compact cassettes served as catalysts for social change. Their small size, durability and ease of copying helped bring underground rock and punk music behind the Iron Curtain, creating a foothold for Western culture among the younger generations. [ 37 ] For similar reasons, cassettes became popular in developing nations .
One of the most famous political uses of cassette tapes was the dissemination of sermons by the exiled Ayatollah Khomeini throughout Iran before the 1979 Iranian Revolution, in which Khomeini urged the overthrow of the regime of the Shah, Mohammad Reza Pahlavi.[38] During the military dictatorship of Chile (1973–1990) a “cassette culture” emerged where blacklisted music or music that was by other reasons not available as records was shared.[39][40][41] Some pirate cassette producers created brands such as Cumbre y Cuatro that have in retrospect received praise for their contributions to popular music.[41] Armed groups such as Manuel Rodríguez Patriotic Front (FPMR) and the Revolutionary Left Movement (MIR) made use of cassettes to propagandize their struggle.[40]
In 1970 s India, cassettes were blamed for bringing unwanted Christian and Islamic influences into traditionally Sikh and Hindu areas. Cassette technology was a booming market for pop music in India, drawing criticism from conservatives while at the same time creating a huge market for legitimate recording companies, as well as pirated tapes. [ 42 ] Some sales channels were associated with cassettes : in Spain filling stations often featured a display selling cassettes. While offering also mainstream music these cassettes became associated with genres such as Gipsy rhumba, light music and joke tapes that were very popular in the 1970 s and 1980 s. [ 43 ]
Decline[edit]
Despite sales of CDs overtaking those of prerecorded cassettes in the early 1990 s, they remained popular for specific applications, such as car audio, personal stereos, boomboxes, telephone answering machines, dictation, field recording, home recording, and mixtapes well into the decade. Cassette players were typically more resistant to shocks than CD players, and their lower fidelity was not considered a serious drawback in mobile use. With the introduction of electronic skip protection it became possible to use portable CD players on the go, and automotive CD players became viable. CD-R drives and truyền thông also became affordable for consumers around the same time. [ 44 ]
By 1993, annual shipments of CD players had reached 5 million, up 21% from the year before; while cassette player shipments had dropped 7% to approximately 3.4 million.[45] By the early 2000s, the CD player rapidly replaced the cassette player as the default audio component in the majority of new vehicles in Europe and America.[citation needed]
Sales of pre-recorded music cassettes in the US dropped from 442 million in 1990 to 274,000 by 2007. [ 46 ] Most of the major US music companies had discontinued production of pre-recorded cassettes by 2003 .For audiobooks, the final year that cassettes represented greater than 50 % of total market sales was 2002 when they were replaced by CDs as the dominant truyền thông. [ 47 ] Many out-of-print titles, such as those published during the cassette’s heyday of the 1970 s to early 2000 s, are only available on the original cassettes .The last new car with an available cassette player was a năm trước TagAZ AQUiLA. [ 48 ] Four years prior, Sony had stopped the production of personal cassette players. [ 49 ] In 2011, the Oxford English Dictionary removed the phrase ” cassette player ” from its 12 th edition Concise version. [ 50 ] Some truyền thông sources mistakenly claimed that the term ” cassette tape ” was being removed. [ 51 ]In India, music continued to be released on the cassette format due to its low cost until 2009. [ 52 ]
21 st – century use and revival[edit]
Myanmar.Burmese music cassette tapes for marketing, YangonAlthough portable digital recorders are most common today, analog tape remains a desirable option for certain artists and consumers. [ 53 ] [ 54 ] Older genres like ” dansband ” may favor the format most familiar to their fans. [ 55 ] Some musicians and DJs in the independent music community maintain a tradition of using and releasing cassettes due to its low cost and ease of use. [ 53 ] [ 54 ] Underground and DIY communities release regularly, and sometimes exclusively, on cassette format, particularly in experimental music circles and to a lesser extent in hardcore punk, death metal, and black metal circles, out of a fondness for the format. Even among major-label stars, the form has at least one devotee : Thurston Moore claimed in 2009, ” I only listen to cassettes. ” [ 56 ] Very few companies ( as of 2021 ) still make cassettes. Among those are National Audio Company, from the US, and Mulann, also known as Recording The Masters, from France. [ 57 ] [ 58 ] They both make their own magnetic tape, which used to be outsourced .In 2010, Botswana-based Diamond Studios announced plans [ 59 ] for establishing a plant to mass-produce cassettes in a bid to combat piracy. It opened in 2011. [ 60 ]In South Korea, the early English education boom for toddlers encourages a continuous demand for English language cassettes, as of 2011, due to the affordable cost. [ 61 ]
National Audio Company in Missouri, the largest of the few remaining manufacturers of audio cassettes in the US, oversaw the mass production of the “Awesome Mix #1” cassette from the film Guardians of the Galaxy in 2014.[62] They reported that they had produced more than 10 million tapes in 2014 and that sales were up 20 percent the following year, their best year since they opened in 1969.[63] In 2016, cassette sales in the United States rose by 74% to 129,000.[64] In 2018, following several years of shortage, National Audio Company began producing their own magnetic tape, becoming the world’s first known manufacturer of an all-new tape stock.[65] Mulann, a company which acquired Pyral/RMGI in 2015 and originates from BASF, also started production of its new cassette tape stock in 2018, basing on reel tape formula.[66]
In Nhật Bản and South Korea, the pop acts Matsuda Seiko, [ 67 ] SHINee, [ 68 ] and NCT 127 [ 69 ] have released their recent material on limited-run cassettes .In năm nay, retail chain Urban Outfitters, which had long sold LPs, started selling new pre-recorded cassettes ( both new and old albums ), blank cassettes, and players. [ 70 ]Since năm nay, cassette sales have seen a modest resurgence, with năm nay, 2017, and 2018 all showing increases. [ 71 ] [ 72 ] [ 73 ]
Features[edit]
Visualization of the magnetic field on a stereo cassette containing a 1 kHz audio tone .The cassette was a great step forward in convenience from reel-to-reel audio tape recording, although, because of the limitations of the cassette’s size and speed, it initially compared poorly in quality. Unlike the 4 – track stereo open-reel format, the two stereo tracks of each side lie adjacent to each other, rather than being interleaved with the tracks of the other side. This permitted monaural cassette players to play stereo recordings ” summed ” as mono tracks and permitted stereo players to play mono recordings through both speakers. The tape is 0.15 in ( 3.81 mm ) wide, with each mono track 1.5 millimetres ( 0.059 in ) wide, plus an unrecorded guard band between each track. In stereo, each track is further divided into a left and a right channel of 0.6 mm ( 0.024 in ) each, with a gap of 0.3 mm ( 0.012 in ). [ 74 ] The tape moves past the playback head at 1 + 7 ⁄ 8 inches per second ( 4.76 cm / s ), the speed being a continuation of the increasingly slower speed series in open-reel machines operating at 30, 15, 7 + 1 ⁄ 2, or 3 + 3 ⁄ 4 inches per second. [ 7 ] For comparison, the typical open-reel 1 ⁄ 4 – inch 4 – track consumer format used tape that is 0.248 inches ( 6.3 mm ) wide, each track. 043 in ( 1.1 mm ) wide, and running at either twice or four times the speed of a cassette .
Cassette types[edit]
Type I, its tape consisting of iron oxide. The next cassette down, with additional notches adjacent to the write-protect tabs, is Type II, its tape consisting of chrome and cobalt. The bottom two cassettes, featuring the Type II notches plus an additional pair in the middle of the cassette, are Type IV (metal); note the removal of the tabs on the second of these, meaning the tape is write-protected. Type III was a combination of Types I and II but never gained the popularity of the other three types and was made obsolete by Type IV.Notches on the top surface of the Compact Cassette indicate its type. The rear-most cassette at the top of this picture, with only write-protect notches ( here covered by write-protect tabs ), is. The next cassette down, with additional notches adjacent to the write-protect tabs, is. The bottom two cassettes, featuring the Type II notches plus an additional pair in the middle of the cassette, are ; note the removal of the tabs on the second of these, meaning the tape is write-protected. Type III was a combination of Types I and II but never gained the popularity of the other three types and was made obsolete by Type IV .
Cassette tapes are made of a polyester-type plastic film with a magnetic coating. The original magnetic material was based on gamma ferric oxide (Fe2O3). Circa 1970, 3M Company developed a cobalt volume-doping process combined with a double-coating technique to enhance overall tape output levels. This product was marketed as “High Energy” under its Scotch brand of recording tapes.[75] Inexpensive cassettes commonly are labeled “low-noise”, but typically are not optimized for high frequency response. For this reason, some low-grade IEC Type I tapes have been marketed specifically as better suited for data storage than for sound recording.[citation needed]
In 1968,[76] DuPont, the inventor of a chromium dioxide (CrO2) manufacturing process, began commercialization of CrO2 media. The first CrO2 cassette was introduced in 1970 by Advent,[77] and later strongly backed by BASF, the inventor and longtime manufacturer of magnetic recording tape.[78] Next, coatings using magnetite (Fe3O4) such as TDK’s Audua were produced in an attempt to approach or exceed the sound quality of vinyl records. Cobalt-adsorbed iron oxide (Avilyn) was introduced by TDK in 1974 and proved very successful. “Type IV” tapes using pure metal particles (as opposed to oxide formulations) were introduced in 1979 by 3M under the trade name Metafine. The tape coating on most cassettes sold today as either “normal” or “chrome” consists of ferric oxide and cobalt mixed in varying ratios (and using various processes); there are very few cassettes on the market that use a pure (CrO2) coating.[5]
Simple voice recorders and earlier cassette decks are designed to work with standard ferric formulations. Newer tape decks usually are built with switches and later detectors for the different bias and equalization requirements for higher grade tapes. The most common, iron oxide tapes ( defined by the IEC 60094 standard, [ 8 ] as ” Type I ” ) use 120 microsecond ( µs ) equalization, while chrome and cobalt-adsorbed tapes ( IEC Type II ) require 70 µs equalization. The recording bias levels also were different. BASF and Sony tried a dual-layer tape with both ferric oxide and chromium dioxide known as ferrichrome ( FeCr ) ( IEC Type III ), but these were available for only a short time in the 1970 s. Thes e also use 70 µs, just like Type II did. Metal cassettes ( IEC Type IV ) also use 70 µs equalization, and provide still further improvement in sound quality as well as durability. The quality normally is reflected in the price ; Type I cassettes generally are the cheapest, and Type IV are usually the most expensive. BASF chrome tape used in commercially pre-recorded cassettes used Type I equalization to allow greater high-frequency dynamic range for better sound quality, but the greater selling point for the music labels was that the Type I cassette shell could be used for both ferric and for chrome music cassettes .Notches on top of the cassette shell indicate the type of tape. Type I cassettes have only write-protect notches, Type II have an additional pair next to the write protection ones, and Type IV ( metal ) have a third set near the middle of the top of the cassette shell. Thes e allow later cassette decks to detect the tape type automatically and select the proper bias and equalization .An exception to this standard were mechanical storytelling dolls from the 1980 s ( e. g. Teddy Ruxpin ) which used the Type IV metal configuration cassette shell but had normal Type I voice grade tape inside. Thes e toys used the Type IV notches to detect that a specially coded tape had been inserted, where the audio of the story is stored on the left channel and various cue tones to tell the doll’s servos how and when to move along with the story on the right channel .Most pre-recorded chrome cassettes require 120 µs equalization and are treated as Type I ( with notches as Type I ferric cassettes ), to ensure compatibility with budget equipment .
Tape length[edit]
Maxell compact cassettes, C60 ( 90 m ) and C90 ( 135 m ) .Tape length usually is measured in minutes of total playing time. The most popular varieties of blank tape were C60 ( 30 minutes per side ), C90 ( 45 minutes per side ) and C120 ( 60 minutes per side ). [ 1 ] The C46 and C60 lengths typically are 15 to 16 micrometers ( 0.59 to 0.63 mils ) thick, but C90s are 10 to 11 μm ( 0.39 to 0.43 mils ) [ 79 ] and ( the less common ) C120s are just 6 μm ( 0.24 mils ) thick, [ 80 ] rendering them more susceptible to stretching or breakage. Even C180 tapes were available at one time, [ 81 ] but these were extremely thin and fragile and suffered from such effects as print-through, which made them unsuitable for general use .
150 minute length cassettes were available from Maxell (UR 150), Sony (CDixI 150) and TDK (TDK AE 150, CDing1 150 and CDing2 150), only in Japan. All of these were discontinued – Maxell simplified its cassette offer to 10, 20, 60 and 90-minute lengths,[when?] Sony exited the audio cassette market globally,[when?] and Imation, licensee of the TDK trademark, exited the consumer products market.[when?]
Other lengths are ( or were ) also available from some vendors, including C10, C12 and C15 ( useful for saving data from early home computers and in telephone answering machines ), C30, C40, C50, C54, C64, C70, C74, C80, C84, C94, C100, C105, and C110. As late as 2010, Thomann still offered C10, C20, C30 and C40 IEC Type II tape cassettes for use with 4 – and 8 – track portastudios. [ 82 ]Most manufacturers load more tape that a label indicates, for example 90 meters ( 300 feet ) rather than 86 meters ( 282 feet ) of tape for a C60 cassette, and 132 or 135 meters ( 433 or 443 feet ) rather than 129 meters ( 423 feet ) of tape for a C90 cassette, providing an extra minute or two of playback time per side .Some companies included a complimentary blank cassette with their portable cassette recorders in the early 1980 s. Panasonic ‘ s was a C14 and came with a tuy nhiên recorded on side one, and a blank side two. Except for C74 and C100, such non-standard lengths always have been hard to find, and tend to be more expensive than the more popular lengths. Home taping enthusiasts may have found certain lengths useful for fitting an album neatly on one or both sides of a tape. For instance, the initial maximum playback time of Compact Discs was 74 minutes, explaining the relative popularity of C74 cassettes .
Track width[edit]
The full tape width is 3.8 mm. For mono recording the track width is 1.5 mm. In stereo mode each channel has width of 0.6 mm with a 0.3 mm separation to avoid crosstalk. [ 83 ]
Head gap[edit]
The head gap of a tape recorder is the space, along the tape path, between the ends of the pole pieces of the head. Without a gap the head would produce a ” closed ” magnetic field and would not interact enough with the magnetic domains on the tape .
The head-gap width[clarification needed] is 2 µm[according to whom?] which gives a theoretical maximum frequency[citation needed] of about 12 kHz (at the standard speed of 1 7/8 ips or 4.76 cm/s). A narrower gap would give a higher frequency limit but also weaker magnetization.[83] However, such limitations can be corrected through equalization in the recording and playback amplification sections, and narrower gaps were quite common, particularly in more expensive cassette machines. For example, the RP-2 series combined record/playback head (used in many Nakamichi cassette decks from the 1980s and 1990s) had a 1.2 µm gap, which allows for a playback frequency range of up to 20 kHz.[citation needed] A narrower gap width makes it harder to magnetize the tape, but is less important to the frequency range during recording than during playback, so a two-head solution can be applied: a dedicated recording head with a wide gap allowing effective magnetization of the tape and a dedicated playback head with a specific width narrow gap, possibly facilitating very high playback frequency ranges well above 20 kHz.[citation needed]
Separate record and playback heads were already a standard feature of more expensive reel-to-reel tape machines when cassettes were introduced, but their application to cassette recorders had to wait until demand developed for higher quality reproduction, and for sufficiently small heads to be produced .
A compact cassette with write-protect tab for Side 2 removed and then restored .Most cassettes include a write protection mechanism to prevent re-recording and accidental erasure of important material. There are two indentations on the top of a cassette corresponding to each side of the cassette. On blank cassettes these indentations are protected with plastic tabs that can be broken off to prevent recording on the corresponding side of the cassette. Occasionally and usually on higher-priced cassettes, manufacturers provided a movable panel that could be used to enable or disable write-protect on tapes. Pre-recorded cassettes do not have protective tabs, leaving the indentations open .If later required, the cassette can be made recordable again by either covering the indentation with a piece of adhesive tape or by putting some filler material into the indentation. On some decks, the write-protect sensing lever can be manually depressed to allow recording on a protected tape. Extra care is required to avoid covering the additional indents on high bias or metal bias tape cassettes adjacent to the write-protect tabs .
Tape leaders[edit]
In most cassettes, the magnetic tape is attached to each spool with a leader, usually made of strong plastic. This leader protects the weaker magnetic tape from the shock occurring when the tape reaches the end. Some leaders are designed to clean the magnetic heads each time the tape is played. Leader also enables to record over an existing recording cleanly, without a blip of sound that otherwise would be left from the previous recording .
Leaders can be complex: a plastic slide-in wedge anchors a short fully opaque plastic tape to the take-up hub; one or more tinted semi-opaque plastic segments follow; the clear leader (a tintless semi-opaque plastic segment) follows, which wraps almost all the way around the supply reel, before splicing to the magnetic tape itself. The clear leader spreads the shock load to a long stretch of tape instead of to the microscopic splice. Various patents have been issued detailing leader construction and associated tape player mechanisms to detect leaders.[84] Cassette tape users would also use spare leaders to repair broken tapes.[citation needed]
The disadvantage with tape leaders is that the sound recording or playback does not start at the beginning of the tape, forcing the user to cue forward to the start of the magnetic section. For certain applications, such as dictation, special cassettes containing leaderless tapes are made, typically with stronger material and for use in machines that had more sophisticated end-of-tape prediction. Home computers that made use of cassettes as a more affordable alternative to floppy discs (e.g. Apple II, Commodore PET) were designed to not start writing or reading data until leaders had spooled past.[citation needed]
Endless loop cassette[edit]
Some cassettes were made to play a continuous loop of tape without stopping. Lengths available are from around 30 seconds to a standard full length. They are used in situations where a short message or musical jingle is to be played, either continuously or whenever a device is triggered, or whenever continuous recording or playing is needed. Some include a sensing foil on the tape to allow tape players to re-cue. From as early as 1969 various patents have been issued, covering such uses as uni-directional, bi-directional, and compatibility with auto-shut-off and anti-tape-eating mechanisms. One variant has a half-width loop of tape for an answering machine outgoing message, and another half-width tape on spools to record incoming messages.[citation needed]
Cassette tape adapter[edit]
Cassette tape adapters allow external audio sources to be played back from any tape player, but were typically used for car audio systems. An attached audio cable with a phone connector converts the electrical signals to be read by the tape head, while mechanical gears simulate reel to reel movement without actual tapes when driven by the player mechanism.[85]
Xem thêm: Foxconn – Wikipedia
Optional mechanics[edit]
Tape Guide via Security Mechanism ( SM )In order to wind up the tape more reliably, the former BASF ( from 1998 EMTEC ) patented the Special Mechanism or Security Mechanism advertised with the abbreviation SM in the early 1970 s, which was temporarily taken over by Agfa under license. This feature each includes a rail to guide the tape to the spool and prevent an unclean roll from forming. [ 86 ]
The competition responded by inserting additional deflector pins closer to the coils in the lower plastic case half. Some low-priced and pre-recorded compact cassettes were made without pulleys; the tape is pulled directly over the capstan drive.[citation needed] For the pressure of the tape to the head there is a thinner felt on a glued foam block instead of the usual felt on a leaf spring.[citation needed]
Flaws[edit]
Cassette playback has suffered from some flaws frustrating to both professionals and home recording enthusiasts. Tape speed varies between devices, resulting in pitch that is too low or too high. Speed often was calibrated at the factory and could not be changed by users. The slow tape speed increased tape hiss and noise, and in practice delivered higher values of wow and flutter. Different tape formulation and noise reduction schemes artificially boosted or cut high frequencies and inadvertently elevated noise levels. Noise reduction also adds some artifacts to the sound which a trained ear can hear, sometimes quite easily. Wow and flutter, however, can be added to recordings intentionally for aesthetic reasons .
A common mechanical problem occurred when a defective player or resistance in the tape path causes insufficient tension on the take-up spool. This would cause the magnetic tape to be fed out through the bottom of the cassette and become tangled in the mechanism of the player. In these cases, the player was said to have “eaten” or “chewed” the tape, often destroying the playability of the cassette.[87][failed verification] Splicing blocks, analogous to those used for open-reel 1/4″ tape, were available and could be used to remove the damaged portion or repair the break in the tape.
Cassette players and recorders[edit]
Tapematic 2002 audio cassette loaders, used to wind ( ” load ” ) magnetic tape from tape reels ( ” pancakes ” ) in the machine into empty cassette tape shells ( known as C-0s or C-Zeros ) The C-0s have just leader which is cut into two and the tape is attached to the leader, then woundThe first cassette machines ( e. g. the Philips EL 3300, introduced in August 1963 [ 17 ] [ 88 ] ) were simple mono record and playback units. Early machines required attaching an external dynamic microphone. Most units from the 1980 s onwards also incorporated internal electret microphones, which have extended high-frequency response, but may also pick up noises from the recorder’s motor .A common portable recorder format is a long box, the width of a cassette, with a speaker at the top, a cassette bay in the middle, and ” piano key ” controls at the bottom edge. Another format is only slightly larger than the cassette, known popularly as the ” Walkman ” ( a Sony trademark ) .The markings of ” piano key ” controls soon converged and became a de facto standard. They are still emulated on many software control panels. Thes e symbols are commonly a square for ” stop “, an upward-pointed, underlined triangle for ” eject “, a right-pointing triangle for ” play “, a rightward-facing pair of triangles for ” fast forward ” with leftward-facing doubled triangles for ” rewind “, a dot, sometimes colored red, or, occasionally, a red LED, for ” record “, and a vertically divided square ( two rectangles side-by-side ) for ” pause ” .
A typical portable desktop cassette recorder from RadioShackStereo recorders eventually evolved into high fidelity and were known as cassette decks, after the reel-to-reel decks. Hi-Fi cassette decks, in contrast to cassette recorders and cassette players, generally omit built-in amplification or speakers. Many formats of cassette players and recorders have evolved over the years. Initially all were top loading, usually with cassette on one side, and VU meters and recording level controls on the other side. Older models used combinations of levers and sliding buttons for control .
Nakamichi RX-505 cassette deck; this one has an auto reverse feature that rotates the cassette, hence the bump in the middle.
A major innovation was the front-loading arrangement. Pioneer’s angled cassette bay and the exposed bays of some Sansui models eventually were standardized as a front-loading door into which a cassette would be loaded. Later models would adopt electronic buttons, and replace conventional meters (which could be “pegged” when overloaded[clarification needed]) with electronic LED or vacuum fluorescent displays, with level controls typically being controlled by either rotary controls or side-by-side sliders. BIC and Marantz briefly offered models that could be run at double speeds, but Nakamichi was widely recognized as one of the first companies to create decks that rivaled reel-to-reel decks with full 20–20,000 Hz frequency response, low noise, and very low wow and flutter.[89][90] The 3-head closed-loop dual-capstan Nakamichi 1000 (1973) is one early example. Unlike typical cassette decks that use a single head for both record and playback plus a second head for erasing, the Nakamichi 1000, like the better reel-to-reel recorders, used three separate heads to optimize these functions.
Other contenders for the highest ” HiFi ” quality on this medium were two companies already widely known for their excellent quality reel-to-reel tape recorders : Tandberg and Revox ( the consumer marque of Swiss studio equipment manufacturer Studer ). Tandberg started with combined-head machines, such as the TCD 300, and continued with the TCD 3×0 series with separate playback and recording heads. All TCD models used dual-capstan mechanisms, belt-driven by a single capstan motor and two separate reel motors. Frequency range extended to 18 kHz. After a disastrous overinvestment in colour television production, Tandberg folded and was revived without the HiFi division that made these recorders .
Revox went one step further: after much hesitation about whether to accept cassettes at all as a medium capable of meeting their strict standards from reel-to-reel recorders, they produced their B710MK I (Dolby B) and MK II (Dolby B&C) machines. Both cassette units employed dual-capstan mechanisms, but with two independent, electronically controlled capstan motors and two separate reel motors. The head assembly moved by actuating a damped solenoid movement, eliminating all belt drives and other wearing parts. These machines rivaled the Nakamichi in frequency and dynamic range. The B710MKII also achieved 20–20,000 Hz and dynamics of over 72 dB with Dolby C on chrome and slightly less dynamic range, but greater headroom, with metal tapes and Dolby C.[citation needed] Revox adjusted the frequency range on delivery with many years of use in mind: when new, the frequency curve went upwards a few dB at 15–20 kHz, aiming for flat response after 15 years of use, and head wear to match.
A last step taken by Revox produced even more-advanced cassette mechanisms with electronic fine tuning of bias and equalization during recording. Revox also produced amplifiers, a very expensive FM tuner, and a pickup with a special parallel-arm mechanism of their own design. After releasing that product, Studer encountered financial difficulties. It had to save itself by closing its Revox division, thus discontinuing all its consumer products other than their final reel-to-reel recorder, the B77 .
While some[who?] might say that Nakamichi violated the tape recording standards to achieve the highest dynamics possible, producing cassettes that are incompatible for playback on other machines, the reasons for this are more complex than they appear on the surface.[citation needed] Different interpretations of the cassette standard resulted in a 4 dB ambiguity at 16 kHz. Technically, both camps in this debate were still within the original cassette specification as no tolerance for frequency response is provided above 12.5 kHz and all calibration tones above 12.5 kHz are considered optional.[91][92] Decreasing noise at 16 kHz also decreases the maximum signal level at 16 kHz, the High-Frequency Dynamics stay almost constant.[93]
A third company, Bang và Olufsen of Denmark, created the Dolby HX ” head room extension ” system for reliably reducing tape saturation effects at high frequencies while maintaining higher bias levels. [ 94 ] This advanced method is called Dolby HX Pro in full and is patented. HX Pro was adopted by many other high-end manufacturers .
As they became aimed at more casual users, fewer decks had microphone inputs. Dual decks became popular and incorporated into home entertainment systems of all sizes for tape dubbing. Although the quality would suffer each time a source was copied, there are no mechanical restrictions on copying from a record, radio, or another cassette source. Even as CD recorders are becoming more popular, some incorporate cassette decks for professional applications.[citation needed]
Radio – cassette players of the design also called ” ghetto-blasters ” and ” boomboxesAnother format that made an impact on culture in the 1980 s was the radio-cassette, aka the ” boom box ” ( a name used commonly only in North American dialects of English ), which combined the portable cassette deck with a radio tuner and speakers capable of producing significant sound levels. Thes e devices became synonymous with urban youth culture in entertainment, leading to the nickname ” ghetto blaster “. The boom box also allowed people to enjoy music on the go and share it with friends, contributing to cultural practises such as breakdancing .Applications for car stereos varied widely. Auto manufacturers in the US typically would fit a cassette slot into their standard large radio faceplates. Europe and Asia would standardize on DIN and double DIN sized faceplates. In the 1980 s, a high-end installation would have a Dolby AM / FM cassette deck, and they rendered the 8 – track player obsolete in car installations because of space, performance, and audio quality. In the 1990 s and 2000 s, as the cost of building CD players declined, many manufacturers offered a CD player. The CD player eventually supplanted the cassette deck as standard equipment, but some cars, especially those targeted at older drivers, were offered with the option of a cassette player, either by itself or sometimes in combination with a CD slot. Most new cars can still accommodate aftermarket cassette players, and the auxiliary jack advertised for MP3 players can be used also with portable cassette players, but 2011 was the first Mã Sản Phẩm year for which no manufacturer offered factory-installed cassette players. [ 95 ]
A head cleaning cassetteAlthough the cassettes themselves were relatively durable, the players required regular maintenance to perform properly. Head cleaning may be done with long swabs, soaked with isopropyl alcohol, or cassette-shaped devices that could be inserted into a tape deck to remove buildup of iron oxide from the heads, capstan, and pinch roller. Some otherwise normal blank cassettes included sections of leader that could clean the tape heads. One of the concerns of the time however was the use of abrasive cleaning tape. Some of the cleaning tapes actually felt rough to the touch and were considered damaging to the heads. Similarly shaped demagnetizers used magnets to degauss the deck, which kept sound from becoming distorted ( see cassette demagnetizer ) .
Applications[edit]
Audio[edit]
The Compact Cassette originally was intended for use in dictation machines. In this capacity, some later-model cassette-based dictation machines could also run the tape at half speed ( 15 ⁄ 16 in / s ) as playback quality was not critical. The cassette soon became a popular medium for distributing prerecorded music — initially through the Philips Record Company ( and subsidiary labels Mercury and Philips in the US ). As of 2009, one still found cassettes used for a variety of purposes, such as journalism, oral history, meeting and interview transcripts, audio-books, and so on. Police are still big buyers of cassette tapes, as some lawyers ” don’t trust digital technology for interviews “. [ 96 ] However, they are starting to give way to Compact Discs and more ” compact ” digital storage truyền thông. Prerecorded cassettes were also employed as a way of providing chemotherapy information to recently diagnosed cancer patients as studies found anxiety and fear often gets in the way of the information processing. [ 97 ]The cassette quickly found use in the commercial music industry. One artifact found on some commercially produced music cassettes was a sequence of test tones, called SDR ( Super Dynamic Range, also called XDR, or eXtended Dynamic Range ) soundburst tones, at the beginning and end of the tape, heard in order of low frequency to high. Thes e were used during SDR / XDR’s duplication process to gauge the quality of the tape medium. Many consumers objected to these tones since they were not part of the recorded music. [ 98 ]
Broadcasting[edit]
News reporting, documentary, and human interest broadcast operations often used portable Marantz PMD-series recorders for the recording of speech interviews. The key advantages of the Marantz portable recorders were the accommodation of professional microphones with an XLR connector, normal and double tape speed recording for extended frequency response, Dolby and dbx noise reduction systems, manual or automatic gain control ( AGC ) level control, peak limiter, multiple tape formulation accommodation, microphone and line level input connections, unbalanced RCA stereo input and output connections, live or tape monitoring, VU meter, headphone jack, playback pitch control, and operation on AC power or batteries optimized for long duration. Unlike less-expensive portable recorders that were limited to automatic gain control ( AGC ) recording schemes, the manual recording mode preserved low noise dynamics and avoided the automatic elevation of noise .
trang chủ studio[edit]
Beginning in 1979, Tascam introduced the Portastudio line of four – and eight-track cassette recorders for home-studio use .In the simplest configuration, rather than playing a pair of stereo channels of each side of the cassette, the typical ” portastudio ” used a four-track tape head assembly to access four tracks on the cassette at once ( with the tape playing in one direction ). Each track could be recorded to, erased, or played back individually, allowing musicians to overdub themselves and create simple multitrack recordings easily, which could then be mixed down to a finished stereo version on an external machine. To increase audio quality in these recorders, the tape speed sometimes was doubled to 33/4 inches per second, in comparison to the standard 17 ⁄ 8 ips ; additionally, dbx, Dolby B or Dolby C noise reduction provided compansion ( compression of the signal during recording with equal and opposite expansion of the signal during playback ), which yields increased dynamic range by lowering the noise level and increasing the maximum signal level before distortion occurs. Multi-track cassette recorders with built-in mixer and signal routing features ranged from easy-to-use beginner units up to professional-level recording systems. [ 99 ]
Although professional musicians typically used multitrack cassette machines only as “sketchpads” to create demo recordings, Bruce Springsteen’s Nebraska was recorded entirely on a four-track cassette tape.
trang chủ dubbing[edit]
A Magnavox dual deck recorder with high-speed dubbing. Doors are open showing capstans .Most cassettes were sold blank, and used for recording ( dubbing ) the owner’s records ( as backup, to play in the car, or to make mixtape compilations ), their friends ‘ records, or music from the radio. This practice was condemned by the music industry with such alarmist slogans as ” trang chủ Taping Is Killing Music “. However, many claimed that the medium was ideal for spreading new music and would increase sales, and strongly defended their right to copy at least their own records onto tape. For a limited time in the early 1980 s Island Records sold chromium dioxide ” One Plus One ” [ 100 ] cassettes that had an album prerecorded on one side and the other was left blank for the purchaser to use, another early example being the 1980 ” C · 30 C · 60 C · 90 Go ” cassingle by Bow Wow Wow where the b-side of the tape was blank, allowing the purchaser to record their own b-side. Cassettes were also a boon to people wishing to tape concerts ( unauthorized or authorized ) for marketing or trade, a practice tacitly or overtly encouraged by many bands, such as the Grateful Dead, with a more counterculture bent. Blank cassettes also were an invaluable tool to spread the music of unsigned acts, especially within tape trading networks .
Various legal cases arose surrounding the dubbing of cassettes. In the UK, in the case of CBS Songs v. Amstrad (1988), the House of Lords found in favor of Amstrad that producing equipment that facilitated the dubbing of cassettes, in this case a high-speed twin cassette deck that allowed one cassette to be copied directly onto another, did not constitute copyright infringement by the manufacturer.[101] In a similar case, a shop owner who rented cassettes and sold blank tapes was not liable for copyright infringement even though it was clear that his customers likely were dubbing them at home.[102] In both cases, the courts held that manufacturers and retailers could not be held accountable for the actions of consumers.[103]
As an alternative to home dubbing, in the late 1980 s, the Personics company installed booths in record stores across America that allowed customers to make personalized mixtapes from a digitally encoded back-catalogue with customised printed covers. [ 104 ]
Institutional duplication[edit]
Educational, religious, corporate, military, and broadcasting institutions benefited from messaging proliferation through accessibly priced duplicators, offered by Telex Communications, Wollensak, Sony, and others. The duplicators would operate at double ( or greater ) tape speed. Systems were scalable, enabling the user to purchase initially one ” master ” unit ( typically with 3 ” copy ” bays ) and add ” slave ” units for expanded duplication abilities .
Data recording
[edit]
The Hewlett-Packard HP 9830 was one of the first desktop computers in the early 1970 s to use automatically controlled cassette tapes for storage. It could save and find files by number, using a clear leader to detect the end of tape. Thes e would be replaced by specialized cartridges, such as the 3M DC-series. Many of the earliest microcomputers implemented the Kansas City standard for digital data storage. Most home computers of the late 1970 s and early 1980 s could use cassettes for data storage as a cheaper alternative to floppy disks, though users often had to manually stop and start a cassette recorder. Even the first version of the IBM PC of 1981 had a cassette port and a command in its ROM BASIC programming language to use it. However, IBM cassette tape was seldom used, as by 1981 floppy drives had become commonplace in high-end machines .
Nintendo’s Famicom had an available cassette data recorder, used for saving programs created with the hardware’s version of BASIC and saving progress in some Famicom games. It was never released outside Japan, but the North American versions of some of the compatible games can technically be used with it, since many early copies of two of the games (Excitebike and Wrecking Crew) are actually just the Japanese versions in a different shell, and Nintendo intentionally included compatibility in later prints of those titles and in other games since they were planning on releasing the recorder in the region anyway.
The typical encoding method for computer data was simple FSK, typically at data rates of 500 to 2000 bit / s, although some games used special, faster-loading routines, up to around 4000 bit / s. A rate of 2000 bit / s equates to a capacity of around 660 kilobytes per side of a 90 – minute tape .
German-made cassettes sold for computer data recording, mid 1980 sAmong home computers that used primarily data cassettes for storage in the late 1970 s were Commodore PET ( early models of which had a cassette drive built-in ), TRS-80 and Apple II, until the introduction of floppy disk drives and hard drives in the early 1980 s made cassettes virtually obsolete for day-to-day use in the US. However, they remained in use on some portable systems such as the TRS-80 Model 100 line — often in microcassette form — until the early 1990 s .
A streamer cassette for data storage, adapted from the audio Compact Cassette formatFloppy disk storage had become the standard data storage medium in the United States by the mid-1980s ; for example, by 1983 the majority of software sold by Atari Program Exchange was on floppy. Cassette remained more popular for 8 – bit computers such as the Commodore 64, ZX Spectrum, MSX, and Amstrad CPC 464 in many countries such as the United Kingdom [ 105 ] [ 106 ] ( where 8 – bit software was mostly sold on cassette until that market disappeared altogether in the early 1990 s ). Reliability of cassettes for data storage is inconsistent, with many users recalling repeated attempts to load video games ; [ 107 ] the Commodore Datasette used very reliable, but slow, digital encoding. [ 108 ] In some countries, including the United Kingdom, Poland, Hungary, and the Netherlands, cassette data storage was so popular that some radio stations would broadcast computer programs that listeners could record onto cassette and then load into their computer. [ 109 ] [ 110 ] See BASICODE .The use of better modulation techniques, such as QPSK or those used in modern modems, combined with the improved bandwidth and signal-to-noise ratio of newer cassette tapes, allowed much greater capacities ( up to 60 MB ) and data transfer speeds of 10 to 17 kbit / s on each cassette. They found use during the 1980 s in data loggers for scientific and industrial equipment .The cassette was adapted into what is called a streamer cassette ( also known as a ” D / CAS ” cassette ), a version dedicated solely for data storage, and used chiefly for hard disk backups and other types of data. Streamer cassettes look almost exactly the same as a standard cassette, with the exception of having a notch about one quarter-inch wide and deep situated slightly off-center at the top edge of the cassette. Streamer cassettes also have a re-usable write-protect tab on only one side of the top edge of the cassette, with the other side of the top edge having either only an open rectangular hole, or no hole at all. This is due to the entire one-eighth inch width of the tape loaded inside being used by a streamer cassette drive for the writing and reading of data, hence only one side of the cassette being used. Streamer cassettes can hold anywhere from 250 kilobytes to 600 megabytes of data. [ 111 ]
Video[edit]
The PXL-2000 was a camcorder that recorded onto compact cassettes .
Rivals and successors[edit]
Size comparison of Elcaset ( left ) with standard Compact CassetteElcaset is a short-lived audio format that was created by Sony in 1976 that is about twice the size, using larger tape and a higher recording speed. Unlike the original cassette, the Elcaset was designed for sound quality. It was never widely accepted, as the quality of standard cassette decks rapidly approached high fidelity .Technical development of the cassette effectively ceased when digital recordable truyền thông, such as DAT and MiniDisc, were introduced in the late 1980 s and early-to-mid 1990 s, with Dolby S recorders marking the peak of Compact Cassette technology. Anticipating the switch from analog to digital format, major companies, such as Sony, shifted their focus to new truyền thông. [ 112 ] In 1992, Philips introduced the Digital Compact Cassette ( DCC ), a DAT-like tape in almost the same shell as a Compact Cassette. It was aimed primarily at the consumer market. A DCC deck could play back both types of cassettes. Unlike DAT, which was accepted in professional usage because it could record without lossy compression effects, DCC failed in home, mobile and professional environments, and was discontinued in 1996. [ 113 ]
A Compact Cassette and a MicrocassetteThe microcassette largely supplanted the full-sized cassette in situations where voice-level fidelity is all that is required, such as in dictation machines and answering machines. Microcassettes have in turn given way to digital recorders of various descriptions. [ 114 ] Since the rise of cheap CD-R discs, and flash memory – based digital audio players, the phenomenon of ” home taping ” has effectively switched to recording to a Compact Disc or downloading from commercial or music-sharing websites. [ 115 ]Because of consumer demand, the cassette has remained influential on design, more than a decade after its decline as a truyền thông mainstay. As the Compact Disc grew in popularity, cassette-shaped audio adapters were developed to provide an economical and clear way to obtain CD functionality in vehicles equipped with cassette decks but no CD player. A portable CD player would have its analog line-out connected to the adapter, which in turn fed the signal to the head of the cassette deck. Thes e adapters continue to function with MP3 players and smartphones, and generally are more reliable than the FM transmitters that must be used to adapt CD players and digital audio players to car stereo systems. Digital audio players shaped as cassettes have also become available, which can be inserted into any cassette player and communicate with the head as if they were normal cassettes. [ 116 ] [ 117 ]
See also[edit]
References[edit]
Listen to this article (
52 minutes
)
( ), and does not reflect subsequent edits.This audio file was created from a revision of this article dated 23 May 2011, and does not reflect subsequent edits.
- Project C-90, a website dedicated to cassette tapes
- tapedeck.org, an online collection of blank audio tape cassettes
- AudioTools, a cassette tape reference site
Source: https://suachuatulanh.edu.vn
Category: Sharp
